THERMO COLUMN S PLUS seal-in
Ideal for animals of all sizes.
Buse double paroi isolée de mousse polyuréthane.
Une partie à sceller dans le sol (soit H. 400 mm soit 600 mm) pour effet géothermie.
Limite l’emprise du gel sur l’alimentation d’eau des Polyspring.
Allows a POLYSPRING* drinker to be mounted.
Intended to be cast in concrete slab. Placed on the ground, it is naturally protected by employing the ground temperature.
The column can be sealed in two different positions:
- The column is sealed with 400 mm in the ground and 600 mm above ground: recommended for large animals.
- The stand is sealed with 600 mm in the ground and 400 mm above ground: recommended for small animals.
- for mounting between two posts, plan a space of 500 mm.
Insulated with latest generation polyurethane foam, they naturally protect the water inlet from freezing.
This prevents any loss of natural ground heat (3°C to 5°C) which keeps the POLYSPRING non-freeze.
They have been designed to improve and facilitate the mounting of all versions of POLYSPRING drinkers.
Insulated with polyurethane foam, it naturally protects the water inlet from freezing.
Factory fitted with four fastening holes in the base and a hole to accommodate the POLYSPRING drain pipe, on right or left (non-used side is closed with a flexible plug).
Compatible with POLYSPRING II drinkers.
- Material
- rotomolded polyethylene resin
- Width
- 416 mm
- Height
- 1000 mm
- Depth
- 416 mm
- Fastening
- to seal in the ground
- Packaging
- boxed
- Sales unit
- Unit
