High flow float valve tap

The float valve tap, adjustable in height and length, adapts to the force needed to shut off the flow depending on the water pressure and desired water height. Network pressure and low pressure mechanisms fitted with an indexer, anti-splash, and water stop to halt the flow in the system at any time.
Available in different versions:
- 15 liters/minute flow rate with green polyamide float valve with or without adjustment screw.
- 32 liters/min flow rate, white translucent polyamide float valve.
- 32 liters/min flow rate, white polyamide float valve with height flow adjustment screw.
- Low pressure flow rate, black polyamide float valve.

Also available our 42 liters/minute flow float valve in brass with two factory fitted floats for large capacity drinking troughs. It can be upgraded by adding 2 floats for any pressure above 4 bars.
Adjustable float valves are fitted with an adjustment screw.

Brass body operates on pressure ranges of:
- 4 bars for 42 l/min (with nominal flow rate of 75 l/min) with its two factory fitted float valves
- 5 bars for 53 l/min (with nominal flow rate of 100 l/min) with its two factory fitted float valves and an its optional kit of 2 extra floats.
Height adjustment by sliding the float valve along its large cross section stainless steel bar.
Is fitted with:
- a locking mechanism to shut off the water supply.
- a 20/27 mm (3/4") external male thread
- a 15/21 mm (1/2") internal female thread - locknut with seal.