Heating POLYSPRING II push-type drinker/waterer

Caution : it is recommended to order the thermostat and the right transformer suited to your facility and the number of heated drinkers.

POLYSPRING drinkers are designed to be used in numerous configurations.
Fitted with a pilot valve, they feature a wide heavy-duty double walled,rotomolded polyethylene bowl.
Their flow rate is adjustable from 0 to 18 liters/minute depending on the network pressure.

They are fitted with :

• Horizontal pilot valve,
• A reinforced cast aluminium mounting plate which can be directly fastened above the column,
• An antispill rim in cast aluminium.

Mounting recommendations:
should preferably be installed on a rotomolded THERMO M, S or S PLUS column depending on the required installation or type of livestock.
Water supply can be connected directly to the THERMO M, S and S PLUS columns since it is delivered with a 1/2 flexible stainless steel braided hose.

The heating Polyspring push-type drinker/waterer features:
- 1 polyresistance 24V – 80W,
- 1 LED indicator to show that the power is on.