Pressure reducer
Non-heating POLYSPRING II constant level drinker
Feature-Benefits :
Designed to be set on PE Columns to protect from freezing. Suitable between two pens.
The non-heating POLYSPRING II constant level drinker is upgradeable via an optional heater kit.
Optional : Polyresistance 80W - 3VA.
POLYSPRING drinkers are designed to be used in numerous configurations.
Fitted with a constant level mechanism, they are designed with a wide double-walled, rotomolded polyethylene bowl.
Their mechanism is protected by a high-quality cast aluminium housing. The mechanism is 15 liters/minute depending on the pressure. The constant level model works ideally with pressure of 3 to 4 bars maximum.
They are fitted with:
• 1 LA GEE 15 litres/minute green float valve tap with adjustment screw,
• 1 water stop system,
• A cast aluminium mounting plate that can be directly fastened above the column,
• An anti-spill cast aluminium rim for optimal use without spillage, thus keeping bedding material clean.
Delivered without column.
Compatible with Thermo S600, S400, M and S PLUS columns.
- Material
- resin and cast aluminium
- Length
- 425 mm
- Width
- 437 mm
- Height
- 235 mm
- Pressure
- network
- Drinker
- Polyspring II NC
- System
- constant level
- Mechanism
- float valve tap
- Fastening
- column
- Device
- non-heating
- Flowrate
- 1 à 18 l/min
- Connection diameter
- braided hose 1/2'' (15/21 mm) – female
- Packaging
- boxed
- Sales unit
- Unit
- Sales packaging unit
- Boxed.
- Float valve
- Polyamide colour green (P1138315)
- Drain plug
- Ø 25 mm
Accessories and options
